Pressure Reducer & Pressure Gauge
Accurate pressure control & reliable measurement.
Ensuring constant pressure and precise control across your systems.
The right pressure – stable and reliable.
A stable and correctly set operating pressure is essential for the safety and efficiency of any system.
Our high-quality pressure regulators and durable pressure gauges ensure precise control and reliable
monitoring of your processes.
1. Pressure regulator (pressure reducing valve)
Our pressure regulators reduce high inlet pressure to a stable, lower outlet pressure – protecting your system from potential damage. We offer models for drinking water (DVGW-certified) as well as for general industrial applications.
2. Pressure gauges (manometers)
Our durable pressure gauges provide accurate and reliable indication of current system pressure.
Available in various connection types (radial bottom / rear center) and accuracy classes.
Pressure regulator for drinking water, DVGW-tested
thread R 1/2 - R 2
Flow kvs value:
2.4 m³/h - 12.6 m³/h
Brass
Pressure regulator for drinking water, DVGW approval not necessary.
thread R 1/2 - R 2
flow kvs value
2.4 m³/h - 12.6 m³/h
Brass
Pressure regulator for drinking water DVGW-tested (EN 1567)
thread R 1/2 - R 1 1/4
flow kvs value
2.9 m³/h - 6.1 m³/h
gunmetal
Pressure regulator for drinking water, without DVGW approval
thread R 1 1/2 - R 2
flow kvs value
9 m³/h - 13 m³/h
gunmetal
Pressure regulator for drinking water (without DVGW approval), high back pressure max. 12 bar
thread R 1/2 - R 2
Flow kvs value:
2.9 m³/h - 13 m³/h
gunmetal
Pressure regulator for water, low back pressure max. 2 bar
thread R 1/2 - R 2
Flow kvs value:
2.9 m³/h - 13 m³/h
gunmetal
Pressure regulator (diaphragm pressure regulator made of brass without secondary venting, including pressure gauge, specially
thread G 1/4 - G 1 1/2
Flow rate 2.5 l/min - 56 l/min
Brass
Pressure regulator (diaphragm pressure regulator without secondary venting, incl. pressure gauge, for water,
Control range min.0.1 bar
control range max.10 bar
Brass
Different variants
Pressure gauge in robust design, rear connection
G 1/2"
100mm
0-250bar variants
copper alloy
CrNi steel
Pressure gauge in robust design, connection radially below
G 1/2"
100mm
0-250bar variants
copper alloy
CrNi steel
Standard pressure gauge, rear connection, centric
..
Standard manometer
connection radially below
Your contact for high-quality and reliable valve solutions.
WE SAY THANK YOU FOR ALMOST 70 YEARS OF TRUST.